HVAC Goose Creek SC

Air Conditioner Won’t Turn On – 5 Troubleshooting Steps for a Broken AC

There are several reasons why your air conditioner won’t turn on. If it has not been working well from a few days, then you should ask help from a local Goose Creek heating and air company to resolve the issue as fast as possible. Major issues lead to major repairs, costing a lot of money. However, if the system was running all right the last time and all of a sudden started behaving differently, then it may not be a big deal. You may not even have to call for an expert.

What do you have to do to know if it is a severe issue or not?

Well, if your system does not turn on, then it is important to troubleshoot a few things. It should not take more than a few minutes before you would know the reason, and you may be able to resolve it all by yourself. Just give yourself a chance…

Step 1: Air Conditioner Won’t Turn On – Check Your Thermostat

I know it would sound silly if I told you there have been many times people have called HVAC professionals telling their air conditioner won’t turn on, and the reason they found out was the temperature was set to too low.

So make sure it is not the case with you. Check your thermostat. Experts of HVAC in Goose Creek, SC, suggest to not change the settings of the thermostat once a technician fixes it, but we know sometimes technical issues occur, and we got to do something. So no worries… Ensure your thermostat has a power and is set to cool. The temperature should be lesser than the room temperature, at least, three degrees lower.

There are thermostats run on batteries. If yours is one, make sure to replace then batteries and try switching on the air conditioner again.

Step 2: Air Conditioner Won’t Turn On?  Check Your AC Air Filter

Air filter you may think is only created to save the AC from dust. Well, that is true to some extent, but everything in a machine is connected to one another. One tiny thing messes the whole system. So, technically, if the air filter is clogged of dust, the coil that transfers the cool air keeps getting colder because it has to provide cool air to the room. The continuity of the cool air in the coil freezes the coil eventually, which stops the AC from working.

Thus, make sure you clean the air filters every few days. And for the efficiency of your air conditioner, try to replace the air filter every few months. If a temporary clog can cause to stop the air conditioner from working, it can do a lot worse if not taken care on time.

Step 3: My AC Unit Won’t Turn On – Check Your Circuit Breakers

A circuit breaker is the perfect place to look for if any of your heavy appliances such as air conditioner won’t turn on. At times, we switch on high-amp devices simultaneously unaware of the fact that the wiring of your house has a limit to supply power. If you go above that, it may result in burning of your electrical devices.

This is where circuit breaker comes, working as a safety device for your expensive home appliances. It trips right at the moment it finds extra power is supplied to a machine, saving it from firing up.

So if that is what happened to your circuit breaker, you are lucky. You check right now and see if it is switched off. If it is not switched off, turn it off and wait for a while, and then turn it on. Your air conditioner should start working.

Remember the circuit breaker is a very powerful technology, so if you find something unusual such as continuous tripping of the breaker, call a HVAC company right away. This could be dangerous.

Step 4: Air Conditioner Isn’t Working – Check Your AC Drain Pan

Underneath your AC is a drain pan that accumulates residual condensation that your air conditioner does not drain out.  If the drain pan is full, it may trigger the float switch that stops your air conditioner from flooding your home with residual condensation.

However, these drains, over time, can be clogged, spilling into your drain pan. Once your drain pan is full after being the drain being clogged, this triggers the float switch to turn the air conditioner off.  Your AC won’t turn on, unless the drain is cleared out. Once you have done that, get the float switch back to downward position.

You can clear out the drain by blowing hard into it with any blower.

Step 5: AC Won’t Turn On – Check the AC Shutoff Switch

Not a lot of people look at the obvious solutions – do not ask me why – but many times people complaining about their AC won’t turn on find out the air conditioner was shut off from the main switch. The switch of the air conditioner is somewhere around the indoor unit. People do not care much about it because it is usually turned on throughout the year, so you cannot blame anyone for that.

However, kids have a reach to everywhere. So maybe that is the case with you. Go check your AC shutoff switch and turn it back on to feel the comfort of your air conditioner.

If you did not find the solution from the above basic steps, we suggest you contact your local Goose Creek heating and air conditioning company and elaborate the issue you are experiencing. You should most probably find the solution.

We would appreciate if you reached out to us after finding the solution. We would like to add your additional information to the above blog. You may help a lot of people during this pandemic. We would be more than happy to give you credits for your time and effort.

1 thought on “Air Conditioner Won’t Turn On – 5 Troubleshooting Steps for a Broken AC”

Leave a Comment

Your email address will not be published. Required fields are marked *